VITC Readers & Generators
AVG-50 "Active" VITC Time Code Generator
The AVG-50 works with SD analog composite video and generates standard SMPTE VITC time code and inserts it into the first few lines of active video rather than into the vertical interval where normal VITC is located. This allows the VITC time code to be recorded on various digital video recorders that record the picture content but do not record the actual vertical interval portion of the video signal and in this way allows you to use these digital video recorders to record high quality video and VITC time code.
TCD-100 Time Code Display
The TCD-100 is a combination high speed LTC and VITC SMPTE time code reader with 0.8" high LED display characters that are ideal for the desktop or for viewing across a room. It can be used in the studio, video production room, remote van, or just about wherever you need to read and display LTC or VITC time code.
TCI-50 Time Code RS-422 Inserter
The TCI-50 provides time code and user bit data to systems that use RS-422 controlled playback devices that do not have built-in SMPTE time code capability.
VG-50 VITC Time Code Generator
The VG-50 is a small, desktop sized combination SMPTE VITC time code generator and LTC-to-VITC time code translator. It's operates with SD analog composite video and is ideal for use to add VITC to a copy of an analog video recording or to add VITC time code to a blackburst reference signal. It has an "On Screen" display of either the time code or the user bits (or OFF) and the display also has a "Phase Meter" which shows the relationship between a SMPTE LTC time code input and the associated video input.
VLR-100 VITC/ LTC Reader
The VLR-100 is a combination high speed LTC and VITC SMPTE time code reader with 0.56" high 8-digit LED display characters. It's small desktop size and convenient front panel switches make it ideal for use in the studio, video production room, remote van, or laboratory.
VLR-100PC SMPTE VITC/ LTC Reader w/ RS-232 I/O
The VLR-100 is a combination high speed LTC and VITC SMPTE time code reader with 0.56" high 8-digit LED display characters and an RS-232 interface. It's small desktop size and convenient front panel switches make it ideal for use in the studio, video production room, remote van, or laboratory.
VLT-50 VITC/Longitudinal Time Code Translator
The VLT-50 translates SMPTE VITC time code into SMPTE longitudinal time code. When used with video tape players it operates throughout the shuttle search speed range to read and translate the VITC time code into LTC. The LTC generator is genlocked to the input video. The VLT-50 accepts an LTC input to route to the LTC output should VITC become unavailable.