The AVG-50 works with SD analog composite video and generates standard SMPTE VITC time code and inserts it into the first few lines of active video rather than into the vertical interval where normal VITC is located. This allows the VITC time code to be recorded on various digital video recorders that record the picture content but do not record the actual vertical interval portion of the video signal and in this way allows you to use these digital video recorders to record high quality video and VITC time code.
The ETD-100 is a 0.8"H LED display timer that can be used to time various situations and events such as talent, speakers, presentations, experiments, etc. The LED display has a brightness control and the 0.8" characters are large enough to be read across a room.
The PG-2100 is an inexpensive palm-sized SMPTE time code generator intended for field use in multi-camera situations when its desirable (or necessary) for each tape to have the exact same time code for precise image matching during post production.
The palm-sized PR-232 is a SMPTE time code reader that is powered from the PC serial port and reads and translates SMPTE time code into standard RS-232 serial data. Included is the HORITA PC-LOG™ time code based logging program and the MTG-TIME program which locks your PC time and date to SMPTE time code time and date.
The PTG is a palm-sized SMPTE time code generator/reader that is simple to setup and operate and features a large 2-line liquid crystal display (LCD) readout for time code, user bits, and setup information. The PTG is an ideal generator for use with video recorders in multi camera situations where it is necessary for each recording to have the same time code for precise time and image matching during post production. These situations may include sporting events, games, concerts, automobile, aircraft, and boating events, parades, weddings, etc.
The PTG2 is a palm-sized SMPTE time code generator/reader that is simple to setup and operate and features a large 2-line OLED display readout for time code, user bits, and setup information. The PTG2 is an ideal generator for use with video recorders in multi camera situations where it is necessary for each recording to have the same time code for precise time and image matching during post production. These situations may include sporting events, games, concerts, automobile, aircraft, and boating events, parades, weddings, etc.
The award winning PTR reads SMPTE/EBU time code and displays the time code and/ or user bit data on a 2-line LCD display. "Store" and "Recall" functions allow quick and easy capture and review of up to 50 time code events. Stored time code and/ or user bit numbers can be sent as RS-232 serial data for input to a computer running the included Horita PTR-LOG program for Windows. The PTR-LOG program receives the stored time codes from the PTR and allows the user to add comments and then save as text or comma delimited files.
The Horita RLT-50 connects to the RS-422 9-pin "remote" connector available on most professional video VCR, VTR, disk, and solid state record/playback devices, and translates the RS-422 time code information into standard SMPTE Longitudinal Time Code (LTC). The RLT-50 operates with SD NTSC RS-170A or PAL 625/50 analog composite video and auto detects the video frame rate and outputs the correct 25 FPS or 29.97 FPS drop frame time code. It can also generate 24 FPS time code if the input video frame rate is at 24 FPS.
The TCC-100 is a dual input time code reader that compares two LTC inputs and displays their time difference on an LED display. The TCC-100 can be used to monitor or verify proper operation of various time code equipment, or simply display the time offset between two time code sources.
The TCD-100 is a combination high speed LTC and VITC SMPTE time code reader with 0.8" high LED display characters that are ideal for the desktop or for viewing across a room. It can be used in the studio, video production room, remote van, or just about wherever you need to read and display LTC or VITC time code.
The TCP-50 is a universal SMPTE longitudinal time code processor that provides a variety of needed time code processing functions to keep up with the changes and requirements of dealing with multi format longitudinal time code.